High-quality wood oil for exterior use by LIVOS is formulated for decks, patios, siding, wall cladding, and torrefied wood. ALIS by LIVOS is a three-in-one product: a sealer, protective oil, and stain for exterior wood surfaces. It provides maximum, long-lasting protection against weathering while preserving the natural look of the wood. Easy to maintain and re-touch. No need to sand the surface before refreshing the surface with a new coat of oil.
- No peeling
- Simple application with a roller, brush, or spray gun
- Exceptional coverage capacity: From 50 to 100 sq. ft. per litre for two coats
- Additional coats require much less product
- Highly effective and ecological oil in the same price range as a conventional toxic product
- SURFACE PREP
- The wood surface must be fully dry, dust-free, and absorbent. We recommend removing mill glaze with 100-grit sandpaper prior to product application. Apply the wood oil when the temperature is above 10 °C. Ensure that the temperature remains above 10 °C throughout the process and for 8 hours following product application. Wood humidity level must remain between 12% and 18% for optimal adhesion.
- WOOD OIL APPLICATION
- FIRST COAT
- Stir the product with a stirring stick to evenly mix the pigment and oil. Test the product on a small area to validate the colour before treating the entire surface. Apply with a brush, a spray gun, or a roller to fully saturate the wood. If needed, wipe down or smooth any excess wood oil after 5 minutes. Wait approximately 18 hours before applying a second coat.
- SECOND COAT
- Apply a thin coat of wood oil with a brush, wiping down or smoothing over any excess oil after approximately 5 to 10 minutes. On house siding, windows, or any other surface, a third coat is recommended. Proceed with the same application steps as during the second coat.
High-quality wood oil for exterior use by LIVOS is formulated for decks, patios, siding, wall cladding, and torrefied wood. ALIS by LIVOS is a three-in-one product: a sealer, protective oil, and stain for exterior wood surfaces. It provides maximum, long-lasting protection against weathering while preserving the natural look of the wood. Easy to maintain and re-touch. No need to sand the surface before refreshing the surface with a new coat of oil.
- No peeling
- Simple application with a roller, brush, or spray gun
- Exceptional coverage capacity: From 50 to 100 sq. ft. per litre for two coats
- Additional coats require much less product
- Highly effective and ecological oil in the same price range as a conventional toxic product